- Suitable for RC cement floors such as idle rooftops or large open areas.
- A locking fastener design is used from the support leg and building connection point to the module and the support connection point.
- Use the 60*30 type C-channel steel beam specification and design, with a triangular upright surface design.
- The standard locking method is four upper press points and four bottom lock points, for a total of eight locking points. (press points can be selected according to customer requirements).
Setup location
RC cement floor (factory rooftop or residence)
High and low point
Less than 1.5 meters
Module direction
Vertical / horizontal placement
Tilt angle
0-30 degree
Wind resistance level
Can resist winds up to category 15 and gusts up to category 17 Or designed according to the customer’s needs.
1
First stake out the anchoring rebar and place the assembled column on top.
2
Measure the tilt angle and adjust the column to the correct position. Place the longitudinal beam so that it passes through the fastener on the column and lock.
3
Use the steering piece to lock the steering beam on the cross beam.
4
Place the module and use a press block to press the top and lock the bottom to secure it to the bottom support.
Patent Certification
Among the component patent applications, some of them have obtained invention and new model patents in Taiwan, Japan, and Germany.
Taiwan patentM55089
German patent20 2017 106 429
Japan patent3214274
Taiwan patent新型第M534756號
German patent20 2017 104 357
US patentUS 10,047,513 B2
Please tell us your thoughts on solar installation and we will make it better.
Related products
