Ground Type – C Type
Low wind speed, low snow load.
Bracket and installation accessories
Product Characteristics
- The ㄇ shape pile is used as the foundation and can be used for both sloped ground and flat ground.
- The ㄇ shape pile an adjustable design. Thus, even if the ground is uneven, it can be adjusted.
- This adjustment can compensate for the uneven ground so that the solar panels are laid evenly without wave form.
- The design standards comply with local regulations.
Setup location
general surface and slope
Connecting method
ㄇ type pile
Tilt angle
5~35 degrees
Module direction
horizontal / vertical
Wind resistance level
38-56.1 m/s
Snow weight resistance
0-150CM
EZ Installation
1
Stick the ㄇ shape piles into the ground according to the staked out points.
2
Install the braces and vertical beams onto the ㄇ shaped pile in sequence.
3
The horizontal beams are fixed on the vertical beam.
4
The modules are then laid down to complete the installation.
Please tell us your thoughts on solar installation and we will make it better.
