- The flat roof type stand tilt angle will be parallel with the roof.
- The cross beam design uses U channel steel beams with punched holes to provide high adjustability. There is no need to pre-determine the hole position for the modules, which makes it convenient to work with at the site.
- The locking method has three upper press points (more can be added according to customer need).The design specification is one piece for two columns.
Setup location
Corrugated sheet roofs/ Nailess corrugated sheet roofs.
Tilt angle
Parallel with the roof
Module direction
Horizontal / vertical
Support height
Column height between 20 - 40CM
Wind resistance level
Can resist winds up to category 15 and gusts up to category 17 Or designed according to the customer’s needs.
1
Stake out the legs according to the interval of the corrugated sheets and the C-channel steel beam, then lock onto the corrugated sheets.
2
The assembly fastener is on the column and locks with the leg.
3
Place the U channel steel cross beam slide rail with the punched holes and slide it into position, then use screws to lock it.
4
Place the module and use a press block to press the top and lock the bottom to secure it to the bottom support.
Patent Certification
Among the component patent applications, some of them have obtained invention and new model patents in Taiwan, Japan, and Germany.
Taiwan patent新型第M534287號
German patent20 2017 104 045
Japan patent3213443
US patent10,330,347 B2
Taiwan patent新型第M566439號
Japan patent3217892
Please tell us your thoughts on solar installation and we will make it better.
Related products
